AEG 2842-6 I installation instructions Cleaning and Care, Changing the light bulb

Models: 2842-6 I

1 14
Download 14 pages 50.79 Kb
Page 13
Image 13
Changing the light bulb

Malfunction

 

Possible Cause

 

Remedy

 

 

 

 

 

 

 

 

 

 

 

 

 

The compressor does not

This is normal, no error has

The compressor starts after

start immediately after chan- occurred.

a period of time.

ging the temperature set-

 

 

 

 

ting.

 

 

 

 

 

 

 

 

 

 

Water on the floor or on sto-

Water drain hole is blocked. See the "Cleaning and

rage shelves.

 

 

Care" section.

If, after carrying out the necessary checks there is still a fault with your appliance please contact your local AEG Service Force Centre.

In guarantee customers should ensure that the suggested checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown.

Please note that proof of purchase is required for any in-guarantee service calls.

Changing the light bulb

Warning! There is a risk of electric shocks! Before changing the light bulb, switch off the appliance and unplug it, or pull the fuse. Light bulb data: 220-240 V, max. 15 W

3.Defrost freezer compartment and clean thoroughly (see section: “Cleaning and Care”).

4.Leave the door open to avoid the build up of odours.

Cleaning and Care

For hygienic reasons the appliance interior, including interior acces- sories, should be cleaned regularly.

Cleaning and Care Warning!

Before carrying out any cleaning or maintenance, disconnect the appliance from the electricity supply.

Never clean the appliance with a steam cleaner. Moisture could accumulate in electrical components, danger of electrical shock! Hot vapours can lead to the damage of plastic parts.

The appliance must be dry before it is placed back into service.

Manual background Warning!

• Ethereal oils and organic solvents can attack plastic parts, e.g.

– lemon juice or the juice from orange peel,

– butyric acid;

– cleansers which contain acetic acid.

Do not allow such substances to come into contact with appliance parts.

• Do not use any abrasive cleansers.

1.To switch off the appliance, turn the temperature regulator to posi- tion "0".

2.Unplug the mains plug.

3.To change the light bulb, unscrew the light cover.

4.Unhook the light bulb cover as shown.

5.Change the defective light bulb.

6.Refit the light bulb cover and the screw.

7.Put the refrigerator back into ope- ration.

AEG65

1.

Remove frozen food and the food from the refrigerator. Wrap frozen food

 

in several layers of newspaper. Store it in a cool place, well covered.

2.

Switch the appliance off and remove the plug from the mains, or swit-

 

ch off or turn out the circuit breaker or fuse.

3.

Clean the appliance and the interior accessories with lukewarm water

 

with a little bicarbonate of soda added (5ml to 0,5 litre of water). Com-

 

mercially available dish washing detergents may also be used.

4.

Dry the appliance thoroughly.

16

13

Page 13
Image 13
AEG 2842-6 I installation instructions Cleaning and Care, Changing the light bulb