Protect 3.M 2.0
Intelligent communication
Protect 3.M 2.0 contains a powerful communications module that readily supplies all relevant information (measurements, alarms and error messages). All information is supplied via an easy to use LCD screen
Large multi-language LCD screen
Languages supported:
»»German »»English »»French »»Spanish »»Portuguese »»Italian »»Turkish »»Russian »»Chinese
Interfaces
»»6 integrated remote signal contacts
»»RS232 interface
»»Two expansion slots for additional remote signal contacts, MODBUS extension card and SNMP adapter
Battery Management
Each UPS power module contains its own battery charger with intelligent charging electronics. These can be adapted to the battery in use and facilitate the use of vendor independent standard batteries.
A temperature compensated charging curve ensures
an optimum charging regime. Automatic testing informs you of the charging state of charge and when charging will be complete.
Protect 3.M 2.0 Customer Benefits
Modular concept
»»The UPS output can be easily adapted to any required performance parameters.
»»Rapid expansion by insertion of new modules at any time and without additional costs.
»»N+1 redundancy module increases reliability
Low maintenance costs
»»Module replacement in case of failure within the shortest possible time.
»»For multiple UPS devices, module exchange between units is possible.
High efficiency
»»Efficiency of 94 % at 35 % load
»»Better efficiency means less heat and thus lower running costs for air conditioning
»»Significant reduction of CO2 emissions
policy of continuous development, the data in this document is subject to change without notice. | AB Electrolux. |
- Due to our | licence from |
01/2012 V1 | used under |
Protect 3.M 2.0 - EN - | registered trademark |
AEGPS - | AEG is a |
AEG Power Solutions
Approach your local AEG Power Solutions representative for further support. Contact details can be found on:
www.aegps.com
