AEG 33060 I manual Water inlet hose with safety valve

	Installation and Connection Instructions
3	The following section is only applicable to dishwashers that have a
	safety valve on the threaded hose fitting for the tap:
	Water inlet hose with safety valve
	After connecting the double-walled water inlet hose, the safety valve is
	next to the tap. Therefore the water inlet hose is only under pressure
	while the water is running. If the water inlet hose starts to leak during
	this operation, the safety valve cuts off the running water and the
	draining pump in the dishwasher is switched on.
1	Please take care when installing the water inlet hose:
	– The distance between the bottom
	edge of the safety value and the
	floor on which the dishwasher is
	standing must be at least 30 cm:
	– The electrical cable for the safety
	valve is in the double-walled water
	inlet hose. Do not immerse the
	water inlet hose or the safety valve
	in water.
	– If the water inlet hose or the safety
	valve is damaged, remove the
	mains plug immediately.
	– A water inlet hose with safety valve
	must only be replaced by a
	specialist or Customer Services.
	– Place the water inlet hose in such a way that it is never higher than
	the bottom edge of the safety valve.

33