What to do if ...
If the tumble dryer is not working correctly please carry out the following checks before calling out an engineer.
Symptom | Possible cause | Solution | |
| The appliance is not | Plug in the appliance | |
| plugged in | ||
|
| ||
| The fuse has blown | Check the fuse | |
| The START/PAUSEbutton | Press the START/PAUSE | |
The tumble dryer will not start | has not been pressed | button | |
| No programme has been | Select the required | |
| selected | programme | |
| The door is not properly | Close the door | |
| closed | ||
|
| ||
| The wrong programme | Select a different | |
| has been selected | programme | |
| Fluff filter blocked | Clean the fluff filter | |
| The tumble dryer has | Observe the maximum | |
| loads stated for each | ||
| been overloaded | ||
| programme | ||
|
| ||
The results are unsatisfactory | Laundry not sufficiently | Ensure the wash load is | |
| |||
| spun prior to tumble | well spun before tumble | |
| drying | drying | |
| A residue may have |
| |
| formed on the drum | Clean the inside of the | |
| interior, blocking the | drum with white vinegar | |
| sensors |
| |
|
|
| |
| Is the tumble dryer | Plug in the tumble dryer | |
| plugged in | ||
|
| ||
The drum illumination does | The programme selector | Turn the programme | |
not work | |||
is in the OFF position | selector dial to LIGHT | ||
| |||
|
|
| |
| The bulb needs replacing | Replace bulb | |
| Fluff filter has not been | Replace the fluff filter | |
The door cannot be closed | inserted correctly and/or | and ensure the filter lid is | |
| the filter lid not closed | closed | |
|
|
|
24