|
|
| What to do if ... | |
|
|
|
| |
| Symptom | Possible cause | Solution |
|
| The dryer ends the drying | Too dry or too little | Select time programme or |
|
| process automatically: END is | higher drying stage (e.g. |
| |
| laundry is in the drum for |
| ||
| displayed shortly after | EXTRA DRY instead of |
| |
| programme start | the selected programme | INTENSIVE DRY) |
|
|
|
| ||
|
| The vent hose may be | Check the vent is not |
|
|
| obstructed | blocked or squashed |
|
|
| Fluff filter is clogged | Clean the fluff filter |
|
| The drying process takes |
| Check the programme |
|
| unusually long. |
|
| |
| SPECIAL CARE button | selection: SPECIAL CARE |
| |
| Note: The drying cycle ends |
| ||
| pressed and too much | button appropriate only |
| |
| automatically after 3 hours: |
| ||
| laundry in the drum | for laundry amounts up |
| |
| - DRYING and COOLING |
| ||
|
| to 2.5kg |
| |
| indicators are flashing |
|
| |
|
|
|
| |
| - acoustic signal sounds | Too much laundry in the | Reduce the amount of |
|
|
| drum | laundry in the drum |
|
|
| Laundry too damp |
| |
|
| more thoroughly |
| |
|
|
|
| |
|
|
|
|
|
If after these checks, the tumble dryer still does not work, contact your local AEG Service Force Centre.
Please note that it will be necessary to provide proof of purchase for any
Replacing the interior light
0A replacement bulb can be purchased through your local AEG Service Force Centre (Part No: 899647072580/6).
1 Warning! Never use standard light bulbs in your Lavatherm.
0Isolate the appliance from the mains supply.
0Unscrew the bulb cover. (The bulb is located at the top behind the door; see Front view).
0Replace the defective bulb.
0Screw on the bulb cover.
1 Warning! For safety reasons the bulb cover must be screwed on. The dryer must not be operated, without the cover in place.
25