Operating instructions
5.Pressing the water softener button increases the hardness setting by 1.
(Exception: hardness setting 0 follows hardness setting 9).
6.When the hardness setting is correct, press the ON/OFF switch. The hardness setting is then saved.
Filling with Special Salt for the Water Softener
1 | Use only special salt for dishwashers. Never fill the salt container with |
| any another type of salt (e.g. culinary salt) or dishwasher detergent. |
This would irreparably damage the water softener.
Prior to filling with salt, please check each time that you really do have a packet of special salt in your hand.
Fill with special salt:
–Prior to using the dishwasher for the first time
–When the SALT indicator on the control panel is illuminated.
3 | If the water hardness in your area is less than 4 °d, you do not need to | ||
| use special salt. |
|
|
0 1. | Open the door, remove the lower |
|
|
|
| ||
|
| ||
| rack. | SALE |
|
|
| ||
|
| ||
|
|
| |
|
|
| |
2. | Undo the lid on the salt container by | SALT |
|
| |||
|
| SALZ |
|
|
|
| |
| turning it anticlockwise. | SEL |
|
|
|
| |
3.Only when using for the first time: fill the salt container with water.
4.Place the funnel supplied on the
container opening.
Fill the container with special salt 
through the funnel; the capacity of
the container is approx. 
depending on the grain size. Do not
overfill the salt container with special salt.
3 | The water expelled by filling the salt container with special salt runs |
| out of the salt container onto the base of the washing compartment. |
This is not a cause for concern, the water will be pumped out at the start of the next wash programme.
5.Clean any salt remnants on the container opening.
12
