Kenwood KDC-X559, KDC-X659, KDC-719, KDC-MP819 Connectina Wires to Terminals, piqfzy, ‘I @=el

Connectina Wires to Terminals

Non-fadrng right output (Red) (KDC-X659/X559 only)

Non-fadrng left output (White) (KDC-X659/X559 only

Rear right output (Red)

Rear left output (Whrte

KENWOOD drsc changer control rnpu

-Front right output (Red)

-Front left output (WhIteI

To connect the DISCchanger, consult your Disc changer manual.

If no connections are made, do not let the wire come out from the tab.

Wiring harness (Accessory@)

When using the optional power amplifier, connect to its power control termrnal.

Depending on what antenna you are usrng, connect either to the control terminal of the motor antenna, or to the power terminal for the booster amplifier of the film-type antenna.

To car light control switch

Power control wire (Blue/White)

Motor antenna control wrre (Blue)

To “EXT.AMP.CONT.”			terminal of
the amplifier having			the	external	EX’CONTExternal amplifier control wire
		amp control		function.	(Pink / Black) (KDC-X659/X559 only)
Ignition	ke)	‘I @=el					Purple/Black
switch
		-piqfzy*			Ignition	wire	(Red)
Car fuse box					Battery	wire	(Yellow)
(Main fuse)

Ground wire (Black) @ (To car chassis)

Battery

-33-