Safety precautions
1AWARNING 1
To prevent injury&r fire, take the following precautions:
l Insert the unit all the way in until it is fully locked in place. Otherwise it may fall out of place when jolted.
l When extending the ignition, battery, or ground wires, make sure to use automotive- grade wires or other wires with a 0.75mm2 (AWGI 8) or more to prevent wire deterioration and damage to the wire coating.
l To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit.
l If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer.
l Make sure not to get your fingers caught between the faceplate and the unit.
l Be careful not to drop the unit or subject it to strong shock.
The unit may break or crack because it contains glass parts.
1ACAUTION_ 1
To prevent damage to Ihe machine, take the following precautions:
l Make sure to ground the unit to a negative 12V DC power supply.
l Do not open the top or bottom covers of the
unit.
l Do not install the unit in a spot exposed to direct sunlight or excessive heat or humrdity. Also avoid places with too much dust or the possibility of water splashing.
l Do not subject the faceplate to excessive shock, as it is a piece of precision equipment.
l When replacing a fuse, only use a new one with the prescribed rating. Using a fuse with the wrong rating may cause your unit to malfunction.
l To prevent a short circuit when replacing a fuse, first disconnect the wiring harness.
l Do not place any object between the faceplate and the unit.
l Do not use your own screws. Use only the screws provided. If you use the wrong screws, you could damage the unit.
l Do not apply excessive force to the moving faceplate. Doing so will cause damage or malfunction.
l Do not apply excessive force to the open faceplate or place objects on it. Doing so will cause damage or breakdown.
IMPORTANT INFORMATION
About the disc changer/CD player to be connected:
To connect a disc changer having the
A disc changer doesn’t work when it is connected without using these options.
If a model with no
Note that none of the
You can damage both your unit and the CD
Achanger if you connect them incorrectly.
Do Not Load 3-in. CDs in the CD slot
If you try to load a 3 in. CD with its adapter into the unit, the adapter might separate from the CD and damage the unit.