Installation
W Removing | the | hard | rubber frame |
| W Removing | the Unit |
| |
1 Engage the catch p@s on the removal tool and remove the two | - | 1 Refer to the section | “Removing the | hard rubber frame” and then | ||||
| remove the hard rubber frame. |
| ||||||
locks on the lower level. |
|
| ||||||
| 2 Remove the | screw | (M4 x 8) on the | back panel. | ||||
Lower the | frame | and | pull It forward as shown In the figure. |
| ||||
|
|
|
|
| 3 Insert the two removal tools deeply Into the slots on each side, | |||
|
|
|
|
| as shown. |
|
|
|
|
|
|
|
| Screw iM4X8) |
|
| |
|
|
|
|
| (commercrally | ’ |
| |
|
|
|
|
| available) |
|
|
|
Removaltool
2 When the lower level IS removed, remove the upper two locations.
/
@The frame can be removed from the top srde rn the same manner
4Lower the removal tool toward the bottom, and pull out the unrt halfway while pressrng towards the inside.
Be careful to avoid rnruryfrom
Athe catch pins on the removal tooi
5Pull the unit all the way out with your hands, being careful not to drop it.
- 35 -