Kenwood KDC-X559, KDC-X659, KDC-719, KDC-MP819 instruction manual Reattachinn

Reattachinn	the Facealate	I			Function	of the	KDC-X659/KDC-X559
1 Align the shaft on the unit with the depression on the
faceplate.		Makes	the	sound different for the front		channel	and rear
		channel.
		1 channel is the unit’s internal source, the other channel is the
		Auxiliary		input	source sound.
		Press the [S.Al button for at least 1 second.
2 Push the faceplate in until it clicks.		Each time the button is pressed for at least 1 second Dual Zone
		System switches ON or OFF.
The faceplate is locked in place, allowlng you to use the unit.
		When It’s ON, “Zone 2 ON” IS displayed.
		@	l	When	the Dual Zone System is ON, there IS no Auxiliary			Input
				source channel audio control or other effect.
			l	When	the Dual Zone System IS being used the Internal			source
				channel can’t be used with an External disc source.
			l When you set the Dual zone system to ON while the non-fading
				preout IS swktched ON, the sound of the non-fading preout Isn’t

l

l l

output.

The Dual Zone System can be used with the optional Auxiliary input sources shown below.

KCA-S21 OA CA-ClAX

CD changer with an Auxlllary Input function installed. This function can be used in Auxiliary Input source.

The front channel and rear channel can be set to be the internal source or the Auxiliary input source. Refer to the <Dual Zone System Setting> (page 28).

-17-