4 Select the character type Press the I)II] button.
Each time the button &pressed the character type switches as shown below.
Character type Alphabet upper case Alphabet lower case Numbers and symbols
Special characters (Accent characters)
5 Select the characters
Press the [FM1 or [AMI button.
@Characters can be entered by usrng a remote wcth a number buttons.
Example. If “DANCE” is entered.
Character | Button | #Times pressed |
“D” | I#31 | 1 |
“A” | WI | 1 |
“N” | W61 | 2 |
“C” | WI | 3 |
“E” | [#31 | 2 |
6 Repeat steps 3 through 5 and enter the name.
7 Exit name set mode Press the [NAMES] button.
@l When operation stops for 10 seconds the name at that time is registered, and Name Set mode closes.
l Memory numbers FM: 32 stations
-AM: 16 stations
Internal CD player: 30 drscs
-External CD changer/ player: Varies according to the CD changer/
player. Refer to the CD changer/ player manual.
l The title of station/CD can be changed by the same operation used to name it.
- Switch@@ the display mode.
Press the [DISPI button.
Each time the button is pressed the Display mode switches as
shown | below. |
|
|
|
|
Display | mode |
| Display |
|
|
Upper | and lower division display | type | “Display | Type | A” |
Type that mainly uses the display | upper part “Display Type | B” | |||
Full screen display type |
| “Display | Type C” | ||
(2. l The drsplay of each part can be changed.
Swrtchrng Upper and Lower Part Display: (page 14) - Swrtching Full Screen Display. (page 13)
l“Drsplay Type C” can’t be selected rn “ALL OFF”.
Switching the Full screen display.
Press the [S.A] button.
Each time the button is pressed the display switches as shown below.
Information Demonstration Spectrum Analyzer 1 Spectrum Analyzer 2 Spectrum Analyzer 3 Spectrum Analyzer 4 Spectrum Analyzer 5
@Full Screen display can be selected when “Display Type C” is selected rn <Display Mode Switchrng> (page 13).
-13
