Switching the information displayed in Standby.
1 Enter Standby E Press the [SRCl button. Select the “ALL OFF” display
2 Switch the display Press the [S.Al button.
Each time the button is pressed the display switches as shown below.
Information | Display |
Demonstration |
|
Date & Clock |
|
Standby display | “ALL OFF” |
@, l Demonstration can be selected when “Display Type A” IS selected In &splay Mode Switching> (page 13).
lOnly “Display Type A” and “Display Type B” can be selected In “ALL OFF”.
Switching the upper and lower part display.
1 Select the Display Type Press the [DISPI button.
2 Enter Display Control mode Press the [S.Al button.
“Display Control Mode On” is displayed.
3 Switch the Upper part display Press the [FM] or [AMI button.
Switch the Lower part display Press the [WI or 1~1 button.
Each time the button is pressed the display switches.
The Reference for the display content is after this operation’s explanation.
4’Exit Display Control mode Press the [SAI button.
@l The same information can’t be displayed on the Upper part display and lower part display.
l The Upper part display and Lower part display switching can be selected when “Display Type A’ is selected in <Display Mode Switching> (page 13).
l When “Display Type B” IS selected the Lower part display content IS clock ON or OFF.
In Tuner source |
|
|
| ||
Upper | Part | Display |
|
| |
Information |
|
| Display | ||
Band display | & Station name | “BAND+ch+SNPS” | |||
Band display | & Frequency | “BAND+ch+FREQ” | |||
Lower | Part | Display |
|
| |
Information |
|
| Display | ||
Spectrum | Analyzer | & Graphic | “S/ANA+GRAPHIC” | ||
Spectrum | Analyzer | & Clock | “S/ANA+CLOCK” | ||
Spectrum | Analyzer |
| “S/ANA” | ||
Date |
|
|
|
| “DATE” |
Clock & Graphic |
| “CLOCK+GRAPHIC” |
@For Disc name registration refer to <Station/Disc Naming (SNPVDNPS )> (page 12).