Kenwood KDC-X659, KDC-X559, KDC-719, KDC-MP819 instruction manual Menu svstem

Menu svstem

		en the vehicle		light”
“Dimmer	ON”	The display	dims.
“Dimmer	OFF”	The display	doesn’t	dim.

Function of the KRC-X659/KDC-X559

Setting display/don’t display for the System Q factors (Bass center frequency, Bass Q factor, Bass extend, Middle center frequency, Middle Q factor, and Treble center frequency) in Audio control.

Display		Setting
“System	Q ON”	The	System	Q factors	are displayed.
“System	Q OFF”	The	System	Q factors	aren’t displayed.

Toggles ON or OFF the mute control on the built-in amplifier. Turning ON this control enhances the preout quality.

Display			Setting
“AMP	Mute	OFF”	The built-in amplifier	activates.
“AMP	Mute	ON”	The built-in amplifier	deactivates.

Setting the Front channel and Rear channel sound when the Dual Zone System is ON.

DisplaySetting

“Zone 2 Rear” The front is this unit’s internal source, and the rear is Auxiliary input sound.

“Zone 2 Front” The rear is this unit’s internal source, and the

front is Auxiliary input sound.

Adjust the bass boost level of the external amplifier using the main unit.

DisplaySetting

“AMP Bass	Flat”	Bass	boost	level	is flat.
“AMP Bass	+6”	Bass	boost	level	is low (+6dB).
“AMP Bass	+12”	Bass	boost	level is mid (+12dB).
“AMP Bass	+18”	Bass	boost	level is high (+I 8dB).

@l Refer to the catalog or instruction manual for power amplifiers that

can be controlled from this unit.

lFor amplrfiers there are the model that can be set from Flat to +18 d8, and the model that can be set from Flat to +12 dB.

When an amplifier is attached that can only be set to +12, even if “AMP Bass +18” is selected it won’t operate correctly.

-28-