<No button will work while “busy” is displayed. Wait a few seconds until “busy” disappears from the display.
<If the red indicator on the RECORD button doesn’t light, reload a recordable disc, wait a few seconds until “NO TOC” and
5If necessary, adjust the recording level using the REC LEVEL knob.
Play the source to be recorded and adjust the recording level so that the loudest sound does not exceed the “OVER” indicator on the peak level meter.
The level can be adjusted from
6If PHONO is selected in step 1 , gently lower the tone arm onto the edge of the record (or the track to be recorded).
When the turntable is stopped, the PLAY or the PAUSE button will not work and you cannot start recording.
7Press the PLAY or the PAUSE button to start recording.
8If AUX is selected in step 1 , play the source to be recorded.
When the playback of the source has been finished, press the STOP button to stop recording.
When the rotation of the turntable stops, the recording will stop automatically.
But to prevent unwanted noise from the tone arm being recorded, stop the recording manually by using the STOP button.
C
A
B
A To stop recording
ENGLISH
Press the STOP button (H) to stop recording.
BTo suspend recording temporarily (pause mode)
Press the PAUSE button (J). “busy” briefly appears on the display, and the recording is paused.
To restart recording, press the PLAY button (y) or the PAUSE button (J).
<You cannot restart recording while “busy” is displayed.
<Remember that every time recording is paused or stopped, a new track number will always be assigned. It is not possible to record in two “stages” within one track.
C Manual track division
It is possible to divide the recording into tracks while recording.
While recording is taking place, press the TRACK INCREMENT button. The current track number will be incremented by one.
<The TRACK INCREMENT button works regardless of the MANUAL/AUTO REC setting.
21
