Powerware Powerware 9315 operation manual Calibration Mode, Computer Mode, Remote Monitor Mode

COMMUNICATION

12.5.8Modify Low Battery Time

If Modify Low Battery Time (option 6) is selected from the Main menu (see page 12-9), the following menu is displayed:

Modify Low Battery Time

Low Battery Time (Minutes): 004

Enter New Low Battery Time:

<CR> to return with no change.

NOTE Low Battery Time should be no greater than 999.

To change the Low Battery Time warning level, enter a new time.

12.6Calibration Mode

Calibration mode is used by factory and field service personnel to calibrate system meters. Factory test engineers calibrate the UPS meters prior to shipping so the UPS arrives at your site correctly calibrated. After use, field service personnel may need to use Calibration mode to recalibrate one or more meter settings.

NOTE Calibration mode is for use by service personnel ONLY. To prevent inadvertent modification, this mode can be accessed only by trained personnel.

12.7Computer Mode

Computer mode provides a computer interface which gives your system compatibility with system monitoring and network products. For a list of products available, contact your Eaton sales representative.

12.8Remote Monitor Mode

Remote Monitor mode provides the interface for the RMP, RIM, or SCM described earlier. Port 1 operates by default in Remote Monitor mode.

EATON Powerware® 9315 UPS (500–750 kVA) Installation and Operation Manual S 164201244 Rev E www.powerware.com 12-13