USING THE CONTROL PANEL
8.5.9Port Setup Screen
Select Port 1 or Port 2 from the Setup menu to display one of the Port Setup screens. The Port Setup screens allow you to specify settings for the two serial communication ports on the UPS.
Figure 8‐12 shows the Setup Serial Port 1 screen.
|
| Uninterruptible Power System |
|
| |||
UPS System Normal |
|
|
| 4 MAY 1999 | 09:25:42 | ||
Alarm: | None |
|
|
|
|
|
|
Notice: None |
|
|
|
|
|
| |
Battery |
|
|
|
|
|
| |
Minutes |
| Setup Serial Port 1 |
| ||||
48.5 |
|
|
|
|
|
| |
|
| MODE | RATE | DATA/STOP | HANDSHAKING | SAVE | |
|
| TERMINAL | 9600 | 8 | 1 | XON / XOFF | NO |
Setup |
|
|
|
|
|
| |
Port 1 |
|
|
|
|
|
| |
Port 2 |
|
|
|
|
|
| |
Time |
|
|
|
|
|
|
|
Language |
|
|
|
|
|
| |
Meters | Events | Statistics Graphics | Setup |
|
|
|
|
Figure 8‐12. Port Setup Screen
A small return arrow (
) appears in the upper right corner of the information area of the Port Setup screen. This arrow is a reminder that you can press the 
pushbutton on the control panel to toggle the scroll bar between the menu box and the information area. When the scroll bar is in the information area, the return arrow is in the menu box. When the scroll bar is in the menu box, the return arrow is in the information area.
When the scroll bar appears in the information area, you can use the pushbuttons to change the port configuration. To change a setting, press the 
and 
pushbuttons to highlight the setting you want to change. To scroll through the available options for that setting, press the 
or 
pushbutton. To save the settings upon exit from this screen, be sure the Save field is set to YES.
The setup screens for Port 1 and Port 2 are identical. For detailed information about configuring the serial ports, see Chapter 12, “Communication.”
EATON Powerware® 9315 UPS |
