Powerware Powerware 9315 operation manual Installing X-Slot Cards

INSTALLING OPTIONAL ACCESSORIES

6.4Installing X-Slot Cards

NOTE LAN and telephone drops for use with X-Slot cards must be provided by facility planners or the customer.

NOTE For setup of an X-Slot card, please contact Eaton (see page 1-7).

To install the X-Slot cards:

1.If not already installed, install the LAN, telephone, or other cables.

2.Remove the access plate on top of the UPS Input/Rectifier cabinet to gain access to the customer interface panel (see Figure A‐13 on page A-23).

3.Remove the X-Slot cover plate to gain access to the X-Slot communication bay (see Figure A‐19 on page A-30).

4.Install the X-Slot card into the communication bay.

5.Route and install the LAN, telephone, and other cables to the appropriate X-Slot card.

6.Refer to the manual supplied with the X-Slot card for operator instructions.

6-10 EATON Powerware® 9315 UPS (500–750 kVA) Installation and Operation Manual S 164201244 Rev E www.powerware.com