1.4Safety Warnings
SThis manual contains important instructions that should be followed during installation and maintenance of the UPS and batteries. Please read all instructions before operating the equipment and save this manual for future reference.
SThe UPS cabinet is designed for industrial or computer room applications and contains safety shields behind the front doors. However, the UPS system is a sophisticated power system and should be handled with appropriate care.
SInstallation and maintenance should be performed only by qualified personnel.
SThe UPS system contains its own energy source (batteries). The output terminals may carry live voltage even when the UPS is disconnected from an AC source.
STo reduce the risk of fire or electric shock, install this UPS in a temperature and humidity controlled, indoor environment, free of conductive contaminants. Ambient temperature must not exceed 40°C
(104°F). Do not operate near water or excessive humidity (95% maximum). The system is not intended for outdoor use.
SEnsure all power is disconnected before performing installation or service.
SELECTRIC ENERGY HAZARD. Do not attempt to alter any battery wiring or connectors. Attempting to alter wiring can cause injury.
SBatteries can present a risk of electrical shock or burn from high
SReplace batteries with the same number and type of batteries as originally installed in the UPS.
SProper disposal of batteries is required. Refer to local codes for disposal requirements.
SNever dispose of batteries in a fire. Batteries may explode when exposed to flame.
SKeep the cabinet doors on and secured to ensure proper cooling airflow and to protect personnel from dangerous voltages inside the unit.
SDisconnect the charging source prior to connecting or disconnecting terminals.
SDetermine if the battery is inadvertently grounded. If it is, remove the source of the ground. Contacting any part of a grounded battery can cause a risk of electric shock. An electric shock is less likely if you disconnect the grounding connection before you work on the batteries.
SDo not operate the UPS system close to gas or electric heat sources.
SThe operating environment should be maintained within the parameters stated in this manual.
SKeep surroundings uncluttered, clean, and free from excess moisture.
SDo not use this equipment for other than intended use.
SThe use of accessory equipment not recommended by the manufacturer may cause an unsafe condition.
SObserve all DANGER, WARNING, and CAUTION notices affixed to the inside and outside of the equipment.
EATON Powerware® 9315 UPS |
