Powerware Powerware 9315 Meters Printout Ctrl+M, System Information Printout Ctrl+A

COMMUNICATION

12.4.3Meters Printout [Ctrl]+[M]

The [Ctrl]+[M] key sequence prints the current readings of the UPS system meters. The Input area shows the phase‐to‐phase voltage, frequency, and phase current of the incoming utility, followed by the kVA, kW, and power factor measurements. The output area shows the same information for the power being output by the UPS. The Bypass area shows the phase‐to‐phase voltage of the bypass source. The Battery area displays the DC voltage (V) and the DC current (I). Figure 12‐5 shows a sample System Meters printout.

		Uninterruptible Power System
UPS System Normal						03 NOV 1997 14:22:45
Alarm:	None
Notice:	None
		Input				Output
VAB		VBC	VCA FREQ		VAB	VBC	VCA		FREQ
480		480	480 60.0		480	480	480		60.0
	IA	IB		IC	IA	IB	IC		IN
	640	640		640	480	480	480		0
	KVA	KW		PF		KVA	KW		PF
	530	505		0.95		400	320	0.80
		Bypass				Battery
	VAB	VBC		VCA		V	+		I
	480	480		480		540			0

Figure 12‐5. System Meters Screen

12.4.4System Information Printout [Ctrl]+[A]

The [Ctrl]+[A] key sequence prints a listing of all available serial data. This printout contains the information shown on the Event History Log and System Meters screens of the UPS (see Figure 12‐4 and Figure 12‐5).

12-8 EATON Powerware® 9315 UPS (500–750 kVA) Installation and Operation Manual S 164201244 Rev E www.powerware.com