Powerware Powerware 9315 operation manual UPS System Output, Environmental Specifications

PRODUCT SPECIFICATIONS

14.3 UPS System Output
	DC Filtering	Ripple voltage less than 0.5% peak to peak
	UPS Output Capacity	100% rated current at 0.8 power factor or 100% rated current at 0.9 power
		factor
	Output Voltage Regulation	1% (10% to 100% load)
	Output Voltage	600 Vac nominal, adjustable from 570 Vac to 630 Vac (60 Hz only)
	Adjustment	480 Vac nominal, adjustable from 456 Vac to 504 Vac (60 Hz only)
	(Nominal +/–5%)	400 Vac nominal, adjustable from 380 Vac to 420 Vac (50/60 Hz)
	Output Voltage Harmonic	3% max THD, 2% max single (linear load)
	Content
	Output Voltage Balance	3% for 100% maximum load imbalance (linear load)
	Output Voltage Phase	3° for 100% maximum load imbalance (linear load)
	Displacement
	Output Transients	"5% for 100% load step or removal
	Frequency Regulation	"0.01 Hz free running
	Synchronous to Bypass	Bypass within voltage limits of +5%, –8% of output setting; bypass within
		"0.5 Hz
	Frequency Slew Rate	1 Hz per second maximum (adjustable)
	Overload Capability	125% for 10 minutes
		150% for 10 seconds
	Maximum Output	300% peak for 10 cycles without bypass
	Capability

14.4 Environmental Specifications

Operating Temperature	0 to 40°C (32–104°F) without derating. The recommended operating
	temperature is 25°C (77°F).
Operating Altitude	Maximum 1500m (5000 ft) at 40°C without derating
Storage Temperature	–20 to +70°C (prolonged storage above 40°C will cause rapid battery
	self‐discharge)
Relative Humidity	95% maximum noncondensing
(Operating and Storage)
Acoustical Noise	75 dBA at a 1m distance
Electrostatic Discharge	Meets IEC 801‐2 specifications.
(ESD) Immunity

14-2 EATON Powerware® 9315 UPS (500–750 kVA) Installation and Operation Manual S 164201244 Rev E www.powerware.com