USING THE CONTROL PANEL
8.5.8Time Setup Screen
Select Time from the Setup menu to display the Time Setup screen. The Time Setup screen allows you to set the internal time stamp of the UPS. The time stamp is used for logging events in the Event History Log. Figure 8‐11 shows the Time Setup screen.
UPS System Normal
ALARM: NONE
NOTICES: NONE
Battery
Minutes
48.5
Setup
Port 1
Port 2
Time
Language
Uninterruptible Power System
4 MAY 1999 | 09:25:42 |
Set Time & Date
DAY DT MON YR HR:MN SAVE
MON 07 APR 99 15:06 YES
Meters Events Statistics Graphics Setup
Figure 8‐11. Time Setup Screen
A small return arrow (
) appears in the upper right corner of the information area of the Time Setup screen. This arrow is a reminder that you can press the 
pushbutton on the control panel to toggle the scroll bar between the menu box and the information area. When the scroll bar is in the information area, the return arrow is in the menu box. When the scroll bar is in the menu box, the return arrow is in the information area.
When the scroll bar appears in the information area, you can use the pushbuttons to change the time stamp settings. To change a setting, press the 
and 
pushbuttons to highlight the setting you want to change. To increase the setting (make it a higher value), press the 
pushbutton. To decrease the setting (make it a lower value), press the 
pushbutton. To save the settings upon exit from this screen, be sure the Save field is set to YES.
EATON Powerware® 9315 UPS |
