Parts of the Turntable
| B |
A | C |
| D |
| E |
| F |
G |
|
Before use, slide the stylus guard (grayish smoke colored plastic cover) up.
ENGLISH
Aturntable
Bscrew fixing the turntable for transportation
Before use, completely loosen the screw by turning it clockwise with a coin or screwdriver.
When you transport the unit, turn the screw counterclockwise to secure the turntable.
C
Use this lever to lift the tone arm.
Dtone arm holder
Espeed selector
Ftone arm
G45 RPM adaptor
How to open/close the turntable cover
To Open:
1Lift the turntable cover all the way up until it stops.
2.Lower the cover slowly until the latch engages.
3.The cover will now stay open. If the latch does not engage, repeat these steps again.
To Close:
1.Lift the cover all the way up until it stops.
2.The latch should disengage and you may now slowly lower the cover.
3.Make sure you grasp the cover by the edges to avoid pinching your fingers as it closes.
9
