HP M1120 MFP Supported network protocols, Install the product on a network network models only

Models: M1120 MFP

1 150
Download 150 pages 27.44 Kb
Page 39
Image 39

Supported network protocols

TCP/IP

Install the product on a network (network models only)

Connect the product to the network

To connect a network model to a network, you need the following items:

Wired TCP/IP network

Ethernet cable (RJ-45)

1.Connect the Ethernet cable to an available port on the Ethernet hub or router.

2.Connect the Ethernet cable to the Ethernet port on the back of the product.

3.Verify that the green light is illuminated on the network port located on the back of the product.

4.Print a configuration page.

NOTE: Do not connect both a USB cable and an Ethernet cable to the product.

Install the software for the network product

To use the product on the network, install the software on a computer that is connected to the network.

ENWW

Supported network protocols 29

Page 39
Image 39
HP M1120 MFP manual Supported network protocols, Install the product on a network network models only