2.Clean the white document lid backing by using a soft cloth or sponge that has been moistened with a mild soap and warm water. Wash the backing gently to loosen debris; do not scrub the backing.

3.Dry the backing by using a chamois or soft cloth.

CAUTION: Do not use paper-based wipes because they might scratch the backing.

4.If this does not clean the backing well enough, repeat the previous steps and use isopropyl alcohol to dampen the cloth or sponge, and then wipe the backing thoroughly with a damp cloth to remove any residual alcohol.

Clean the exterior

Use a soft, damp, lint-free cloth to wipe dust, smudges, and stains off of the exterior of the product.

Firmware updates

Firmware updates and installation instructions for this product are available at www.hp.com/support/ LJM1120. Click Downloads and drivers, click the operating system, and then select the firmware download for the product.

76 Chapter 10 Manage and maintain the product

ENWW

Page 86
Image 86
HP M1120 MFP manual Firmware updates, Clean the exterior