AEG 57520 Start the drying program, Removing laundry or loading laundry when necessary

Drying

Start the drying program

0 Press the button START/PAUSE (START/PAUZE ).

The drying programme begins. You can check the progress of the drying procedure in the pro- gramme progress display.

Removing laundry or loading laundry when necessary

You can interrupt the drying process at any time to remove some of the laundry or to add more laundry.

0Open the door.

1 Caution! The laundry and the drum may be hot.

0Remove or add more laundry.

0Close the door.

0Press the START/PAUSE (START/PAUZE ) button to resume the drying process.

End of the drying process

The cooling phase starts shortly before the end of the drying process: The heater is switched-off during this phase. After the cooling phase the END/CREASE GUARD (EINDE/ANTI-KREUK) display is illuminated. You can now remove the washing from the tumble dryer.

The crease guard phase follows automatically after the drying process. For 30 minutes the drum rotates intermittently. This keeps your laundry loose and crease-free.

If you have pressed the AUDIBLE SIGNAL (ZOEMER) button, an acoustic signal is sounded intermittently during this phase.

You should remove the washing at the latest towards the end of the anti-crease phase to avoid creasing.

Removing the laundry

0Open the door and remove the laundry.

18