Programming options
Objective | Implementation |
|
|
1.Turn the programme selector to any programme.
Permanently programme 2. Press the SIGNAL (ZOEMER) button and hold down for
in the audible signal | approx. 5 seconds. |
which reminds you that | A brief signal sounds several times. The SIGNAL (ZOEM- |
the programme is com- | ER) display flashes several times. |
plete. | The setting is permanently programmed. |
| The setting is cancelled as described under 1 and 2. |
| 1. Turn the programme selector to any programme. |
Adjust “level of dryness” | 2. Press the SILK (ZIJDE) and SIGNAL (ZOEMER) buttons at |
the same time and hold down for approx. 5 seconds. | |
detection: | The current setting appears on the |
If the laundry is slightly | – C0: Setting for drier laundry |
drier or slightly damper | – C1: Standard setting |
at the end of the pro- | – C2: Setting for damper laundry |
gramme than with the | 3. Press the START/PAUSE (START/PAUZE) button until the |
standard setting. | setting required appears on the |
| 4. Turn the programme selector to OFF (UIT). |
| The setting is permanently programmed. |
| 1. Turn the programme selector to any programme. |
| 2. Press the WOOL (WOL) and LONG ANTICREASE (ANTI- |
To deactivate the EMPTY | KREUK) buttons at the same time and hold down for ap- |
WATER (RESERVOIR) dis- | prox. 5 seconds. The |
play when using an ex- | The EMPTY WATER (RESERVOIR) display is permanently |
ternal drain for the | deactivated. |
condensed water. | The setting is cancelled as described under 1 and 2; the |
| |
| ”0”). |
25
