AEG 59800 manual Changing door stop

Changing door stop

1 Warning! The door stop may only be changed by a specialist. If neces- sary, please contact our after-sales service or your specialist dealer. Warning! Before changing the door stop, disconnect the mains plug; with a permanent connection: fully unscrew or deactivate the fuse.

1.Open loading door.

2. Unscrew hinge A from the front of the machine and take off the load- ing door.

3.Remove cover plates B and C. To do this, insert a thin screwdriver into

the slots as shown in the illustra- tion, press downwards slightly and pry out the cover plates.

4. Use an appropriate tool and exert pressure to unfasten locking block D from the snap-on fixture, take out and reinsert on the other side, hav- ing rotated the block through 180°.

5. Unscrew hinge A from the loading door, rotate through 180°, reinsert on the opposite side and screw down.

6.Reinsert cover plates B and C on the opposite site having first rotated them through 180°.

30