AEG 5 Paper filter, Carrying and Storage, Changing the microfilter, HEPA filter, Cleaning

Models: 5

1 8
Download 8 pages 51.53 Kb
Page 6
Image 6
Changing the microfilter

Changing the microfilter

We recommend replacing the microfilter at each fifth paper filter replacement, and at the latest when there is a clean dust bag and the dust level indicator is completely red with the nozzle raised.

Open the lid and fold up. Remove the used microfilter by means of the clean hygienic tabs (figure) and dispose of it with the household waste. Insert the new microfilter and close the cassette.

HEPA filter

A highly effective special filter belonging to Class “S”. This filter offers relief and assistance to allergy sufferers. The HEPA filter should be replaced after one year.

HEPA filter – further supplies available from AEG customer service.

Motor protection filter

The motor protection filter is a permanent filter and does not have to be replaced regularly.

Exception: the filter is damaged. See “What to do if …”.

Cleaning

As required, wipe the housing and the paper filter compartment with a damp cloth. Do not use any scourers or any solvents. Occasionally vacuum the floor nozzle and brushheads with the crevice nozzle.

Paper filter

VAMPYR Seria 5.../COMPACT

E-Nr. 900.087.600

ET-Nr. 668.901.268

Paper filter size 28

Carrying and Storage

To make the appliance easier to store and carry, slide the floor nozzle into the tool rail.

Parking System

For storing the suction pipe and nozzle during short pauses in vacuuming. The bracket on the nozzle is slid into the parking rail on the appliance.

12

Page 6
Image 6
AEG 5 Paper filter, Carrying and Storage, Changing the microfilter, HEPA filter, Motor protection filter, Cleaning