Use 13
Select the required programme (Position 1 on the control panel picture)
You can choose the right programme for any type of laundry following the descriptions on the washing programme tables (see Washing Programmes).
Turn the programme selector dial to the required programme. The programme selector determines the type of washing cycle (e.g. water level, drum movement, number of rinses) and the washing temperature according to the type of laundry.
The pilot light of button 8 starts blinking and the display shows the duration of the selected programme.
The selector dial can be turned either clockwise or anticlockwise. Position O/OFF to Reset programme/Switching OFF of the machine.
At the end of the programme the selector dial must be turned to position O/OFF, to switch the machine off.
Position 
= Cold wash
Easy-Cares = Synthetics.
Attention!
If you turn the programme selector dial to another programme when the machine is working, the yellow pilot light of button 8 will flash 3 times and the message Err is displayed on the display to indicate a wrong selection. The machine will not perform the new selected programme.
Select the SPIN speed reduction or the RINSE HOLD option 
(Button 2)
Press the button 2 repeatedly to change the spin speed, if you want your laundry to be spun at a speed different from the one proposed by the washing machine.
The relevant light will light up.
Important!
For the maximum spin speed performed automatically by the washing machine, see chapter Washing Porgrammes.
RINSE HOLD: by selecting this option the water of the last rinse is not emptied out to prevent the fabrics from creasing. When the programme has finished the display shows a 0 flashing, the pilot lights DOOR illuminates, the pilot light of button 8 is off and the door is blocked to indicate that the water must be emptied out.
To empty the water out:
●turn the programme selector dial to O/OFF
●select the DRAIN or SPIN programme
