AEG 72640 user manual At the end of the programme, Child safety lock

Models: 72640

1 48
Download 48 pages 2.13 Kb
Page 19
Image 19

Use 19

At the end of the programme

The machine stops automatically, the Start/Pause light goes off and a flashing 0 will appear on the display.

If the Rinse Hold option have been selected, the «Door» pilot light illuminates, a flashing 0 will appear on the display, the Start/Pause light goes off and the door remains locked to indicate that the water must be emptied out before opening the door.

To empty out the water please read the steps on the Rinse Hold option paragraph.

Turn the programme selector dial to «O» to switch the machine off.

Remove the laundry from the drum and carefully check that the drum is empty.

If you do not intend to carry out another wash, close the water tap. Leave the door open to prevent the formation of mildew and unpleasant smells.

Child safety lock

This device permits you to leave the appliance unsupervised without having the worry that children might be injured by or cause damage to the appliance.

This function remains able also when the washing machine is not working.

There are two different ways to set this option:

MANCHAS SENSIBLE

TIEMPO RESTANTE

before pressing the «Start/Pause»: it will be impossible to start the machine.

after pressing the «Start/Pause» it will be impossible to change any other programme or option.

To enable (disable) this option press simoultaneously for about 6 seconds «Stain»

and «Sensitive» buttons until the icon appears (disappears) on (from) the display.

Page 19
Image 19
AEG 72640 user manual At the end of the programme, Child safety lock, There are two different ways to set this option