Installation, Unpacking | AEG 72640 manual

40Installation

Installation

Unpacking

All transit bolts and packing must be removed before using the appliance.

You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again.

1.After removing all the packaging, carefully lay machine on it’s back to remove the

polystyrene base from the bottom.

HEC0008

2.Remove the power supply cable and the

draining hose from the hose holders on the rear of the appliance.

HEC0001

3. With the provided spanner unscrew and remove the central rear bolt A.

A

HEC00022

Image 40

AEG 72640 user manual Installation, Unpacking, Polystyrene base from the bottom

Contents

Lavamat Dear Customer Contents International wash code symbols Care and cleaning 29-33 At the end of the programme Child safety lock Consumption value Installation 40-44 Packaging materials Old machine Ecological hints Prior to using for the first time Safety informationGeneral safety Installation Use Child Safety Keep all detergents in a safe place out of children’s reach Product description Detergent dispenser drawer Control panel First Use Acoustic signals PersonalizationDaily Use Load the laundry Select the required programme If required, pour fabric softener into Select the spin speed or the rinse hold option Programme option button Select the Prewash option Select the Stain optionSelect the Sensitive option Select the Quick option Display Delay Start icon will appear on the displayDisplay shows the following information Select the «Start/Pause» Select the Delay StartDoor pilot light is on to indicate the door is locked Delay Start can not be selected with Drain programme Programme progress display Cancelling a programme Select an additional rinseAltering an option or a running programme Interrupting a programme At the end of the programme Child safety lockThere are two different ways to set this option Washing programmes Rinses Drain Spin Refresh Off/O Programme informations Wool Handwash /Silk Rinses Drain Spin Refresh Temperatures Preparing the wash cycleSorting out the laundry Before loading the laundry Following weights are indicative Laundry weightsMaximum loads Removing stains Quantity of detergent to be used Detergents and additivesMarked before starting the wash programme Degrees of water hardness International wash code symbols Care and cleaning Washing drum Door seal Drain pump Water inlet filter Clean the pump if necessary as previously describedEmergency emptying out Frost precautions Something not working Washing machine does not start Machine does not fill Machine fills then empties immediately There is water on the floor Unsatisfactory washing results Cause possible/Solution Problem Cause possible/Solution Drum light doesn’t work Techinical Data Door included White Cottons Synthetics Easy Iron Delicates Consumption valueRinses Drain Spin Refresh Eco Unpacking InstallationPolystyrene base from the bottom Installation Water inlet Positioning and levellingConnect the hose with the angled connection to the machine Water-stop device Water drainageEnd of the drain hose can be positioned in three ways Drain hose must not be kinked Electrical connection Permanent connection Enviroment concerns Packaging materialsOld machine Ecological hints European Guarantee Customer service centres 132 969 551-00-352007 Subject to change without notice