AEG 8160 D installation instructions Changing the light

Models: 8160 D

1 16
Download 16 pages 38.89 Kb
Page 6
Image 6
Changing the light

After approximately three years of use, the KF8 filter should be replaced with a new, as the odour reduction capacity will be reduced.

To remove the filter (Fig. 4):

Remove the grease filters.

Press the red buttons (A), lower the front of the carbon filter.

Remove the carbon filter.

Replace in reverse order.

Fig. 4

Clean the filters regularly. The grease that collects in the filters and the duct could ignite if a hot plate is left on (or if overheating occurs).

Changing the light

Disconnect the cooker hood from the main supply before changing the light. To change the light (Fig. 5):

Remove the the glass diffuser.

Replace the old bulb with a new one of the same type.

Refit the glass diffuser.

Fig. 5

6

Page 6
Image 6
AEG 8160 D installation instructions Changing the light