AEG 86720 manual Service who have a retrofit Washing is not spun

		Operating instructions
Malfunction	Possible Cause	Remedy
	Drain hose is kinked.	Remove kink.
	Maximum pumping height	Please contact customer
	(drain height 1m above the	service who have a retrofit
Washing is not spun	floor on which the machine	kit for pumping to heights of
properly, water is still	is standing) exceeded.	greater than 1m.
visible in the drum.		Switch off the machine and
Error code (2 appears.
	Circulation pump is blocked.	unplug from the mains, clean
		the circulation pump.
	In the case of siphon con-	Clean siphon.
	nection: siphon is blocked.
	The door is locked for safety
The fill-in door cannot	reasons (Indicator next to	Wait until the indicator is
	K/W (DOOR/LIGHT) button	green.
be opened when the	is off).
appliance is switched		Program protection is deacti-
on.
	Program protection is set.	vated
		(see "Program Protection").
	Tap is not fully open.	Open tap completely.
	The sieve in the coupling of
Remnants of detergent	the inlet hose at the tap is	Clean sieve.
are building up in the	clogged.
detergent drawer.	The sieve in the coupling of
	the inlet hose at the appli-	Clean sieve.
	ance is clogged.
	The cause is probably a	No negative impact on the
Rinse water is cloudy.	detergent with a high silicate	rinsing results, possibly use
	content.	liquid detergent.
When an additional
program button is	The additional program
pressed, the corre-	selected cannot be combined	Make another choice.
sponding indicator	with the program set.
does not illuminate.
	Program protection is	Turn program selector back
Program progress dis-	switched on; the program
		to original position
play flashes constantly.	selector has been moved
		(see “Program Protection ”).
	during the washing cycle.

31