Mounting of attachment fitting on the sides of the combi-grill
If the hob is mounted in a 270 X 490
mmcutout, or if for other reasons there is no room for the side attachments, these should be removed before the hob is set into the table.
Set the hob into the table and then raise it enough to expose the screws in the sides.
Remove the screws.
Mount the attachment fittings so that they interlock with the frame (See illustration).
Reinsert the screws in the sides through the oblong hole in the fitting.
Set the hob into the table and tighten the attachment fittings.
16
