AEG 949600686 manual Fixing, Cut-out measurements, Mounting of Reinforcement Beams

Mounting

The hob unit can be mounted in any type of kitchen with a table surface whose thickness is between 28 mm and 40 mm.

Fixing

Unscrew the fixing brackets just enough so they may be turmed. Fasten the brackets to the worktop with a screw driver.

Minmum distance to any shelf underneath shall be 245 mm + room enough for a bowl that can take at least 4 litres.

Cut-out measurements

One rectangular hole is sawn out for the hob combination chosen.

The depth of the cut-out for any unit is: 490 mm

Length of hole = sum of all units` externally measured lenght, less 20 mm.

Mounting of Reinforcement Beams

A reinforcement Beam, with supporting flanges at each end, is included with each two-burner unit. For unit combinations, a reinforcement beam must be used between each unit. It is not necessary to attach the reinforcement beam to the table surface, as it is held in place by a specially designed moulding, which is incorporated in the hob unit´s flanges.

Minimum distance	Minimum distance
to wall:	to wall (non-
150 mm	flammable material):
	150 mm

Reinforcement beams

15