Operating Instructions
Setting/changing the cooking time
1.Select the desired cooking zone using the cooking zone selection buttons and set the desired heat setting.
2.Press the "Timer" button to activate the timer function for this cooking zone.
3.Using the 
or 
buttons, set or change the amount of time required until the cooking zone is to switch off automatically (e.g. 20 minutes).
The timer starts after a few seconds and indicates the amount of time left. The small "Timer Active" indicator is also illuminated for the respective coo king zone, e.g. the upper left indicator corresponds to the rear left cooking zone.
At the end of the cooking time set, the cooking zone switches off automa tically and an acoustic signal sounds.
4.Touch the TIMER button to switch off the signal and the indicator.
For quicker adjustment, leave your finger on the 
or 
button until the desired value is reached.
If the 
button is operated first, the time setting starts at 99 minutes. If the 
button is operated, the time setting starts at 1 minute.
Displaying the remaining cooking time
Select the desired cooking zone using the cooking zone buttons.
If the selected cooking zone is in timer mode, the remaining cooking time appears in the "Cooking Time" display field.
Use of the timer as an interval timer (egg timer)
Important! There must be no cooking zones programmed with the timer!
1.Press the "Timer" button to activate the timer function.
2.Set desired time using the 
or 
buttons (e.g. 20 minutes).
The timer starts after a few seconds and indicates the amount of time left. When the time set is at an end, an acoustic signal sounds.
3.Touch the TIMER button to switch off the signal.
16
