16Installation
6.Unscrew the top door hinge pin of the appliance then screw it back on the oth- er side.
7.Fit the appliance door on the upper door
hinge pin.
8.Remove the lower hinge. Put over the pin in the direction of the arrow.
9.Unscrew and install the screw on the opposite side.
10.Install the lower hinge on the opposite side leaving the position of the door un- changed.
11.Screw in the one screw in the place set free on the other side as well as the adjustable feet (2 pieces).
12. Remove and install the handle5) on the opposite side.
13. Reposition, level the appliance, wait for at least four hours and then connect it
to the power socket.
Do a final check to make sure that:
• All screws are tightened.
• The door opens and closes correctly. If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet. In that case, wait for the natural
fitting of the gasket.
In case you do not want to carry out the above mentioned operations, contact the nearest After Sales Service Force. The After Sales Service specialist will carry out the reversibility of the doors at your cost.
Electrical Connection
CAUTION!
Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
WARNING!
This appliance must be earthed.
The manufacturer declines any liability should these safety measures not be observed.
5) If foreseen
