Care and cleaning |
|
15 | |
|
|
•regularly check the door seals and wipe clean to ensure they are clean and free from debris.
•rinse and dry thoroughly.
Do not pull, move or damage any pipes and/or cables inside the cabinet.
Never use detergents, abrasive powders, highly perfumed cleaning products or wax polishes to clean the interior as this will damage the surface and leave a strong odour.
Clean the condenser (black grill) and the compressor at the back of the appliance with a brush. This operation will improve the performance of the appliance and save energy con- sumption.
Take care of not to damage the cooling system.
When moving the cabinet, lift it by the front edge to avoid scratching the floor.
Many proprietary kitchen surface cleaners contain chemicals that can attack/damage the plastics used in this appliance. For this reason use a soft cloth rinsed in warm water and neutral soap emulsion for cleaning external surfaces.
Do not use detergents or abrasive paste as these will damage the paint, or stainless steel anti finger print coating.
After cleaning, reconnect the equipment to the mains supply.
Cleaning the ice maker
When necessary, clean the surfaces of the dispenser and the ice container that are accessi- ble from the outside, using only a soft cloth and warm water.
Ensure that the ice container is thoroughly dry before being refitted. Do not use detergents or abrasive paste.
Cleaning the ventilation grille
The ventilation grille can be removed for washing.
Make sure the door is open and then:
1.Loosen the upper edge of the grille by pulling outward/downward.
2.Pull the grille straight out to completely remove it.
3. Vacuum clean under the cabinet.
Defrosting of the freezer
The freezer compartment of this model, on the other hand, is a "no frost" type. This means that there is no buildup of frost when it is in operation, neither on the internal walls nor on the foods.
