AEG A92860GNX0 user manual Replacing the lamp, Closing the door

Models: A92860GNX0

1 28
Download 28 pages 5.51 Kb
Page 18
Image 18
Replacing the lamp

 

What to do if…

 

 

 

 

18

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Problem

 

Possible cause

 

Solution

 

 

 

 

 

 

 

The appliance does not

 

The appliance is switched off.

 

Switch on the appliance.

 

operate.

 

 

 

 

 

 

 

 

 

 

 

 

 

The mains plug is not connected

 

Connect the mains plug to the

 

 

 

to the mains socket correctly.

 

mains socket correctly.

 

 

 

 

 

 

 

 

 

The appliance has no power.

 

Connect another electrical appli-

 

 

 

There is no voltage in the mains

 

ance to the mains socket. Check

 

 

 

socket.

 

fuse. Contact a qualified electri-

 

 

 

 

 

cian.

 

 

 

 

 

 

 

No ice.

 

The ice maker is not switched

 

Refer to "Switching on and off

 

 

 

on.

 

the ice maker".

 

 

 

 

 

 

 

 

 

No water supply.

 

Carry out the necessary measures

 

 

 

 

 

on the water supply.

 

 

 

 

 

 

 

The ice dispenser lamp and

 

Leakage in the connection box.

 

Contact service.

 

the child look indicator

 

 

 

 

 

flashes.

 

 

 

 

 

 

 

 

 

 

 

 

 

The ice channel in the door is

 

Remove the obstacle.

 

 

 

blocked.

 

 

 

 

 

No water supply.

 

Carry out the necessary measures

 

 

 

 

 

on the water supply.

 

 

 

 

 

Reset the system by pressing the

 

 

 

 

 

button 2 on the ice dispenser.

 

 

 

 

 

 

 

The lamp does not work.

 

The lamp is defective.

 

Refer to "Replacing the lamp".

 

 

 

 

 

 

 

 

 

The door has been open to long.

 

Close the door.

 

 

 

 

 

 

 

Door interferes with venti-

 

The appliance is not levelled.

 

Refer to "Levelling".

 

lation grill.

 

 

 

 

 

 

 

 

 

 

 

Misaligned door.

 

The appliance is not levelled.

 

Refer to "Levelling".

 

 

 

 

 

 

As much as the advice does not lead to result, call the nearest brand-mark service.

Replacing the lamp

The appliance is equipped with a longlife LED interior light.

Only service is allowed to replace the lighting device. Contact your Service Center .

Closing the door

1.Clean the door gaskets.

2.If necessary, adjust the door. Refer to "Installation".

3.If necessary, replace the defective door gaskets. Contact the Service Center.

Page 18
Image 18
AEG A92860GNX0 user manual Replacing the lamp, Closing the door