Clock functions

 

15

 

 

2. Touch again and again until the dis- play shows .

flashes in the display.

3.Use or to set minutes for DURA- TION.

4.Touch to confirm

5.Use or to set hours for DURATION.

If you touch or during setting hours for DURATION, the appliance goes to setting of the END function.

6.When the set time ends, an acoustic signal operates for two minutes.

symbol and time setting flash in the display. The appliance deactivates. Touch any sensor field or open the oven door to stop an acoustic signal.

7.Deactivate the appliance.

Setting the END

1.Activate the appliance and set an oven function and temperature.

2.Touch again and again until the display shows . flashes in the display.

3.Use or to set END (first you set minutes and then hours) and or to confirm.

4.When the set time ends, an acoustic signal operates for two minutes.

symbol and time setting flash in the display. The appliance deactivates.

5.Touch any sensor field or open the oven door to stop an acoustic signal.

6.Deactivate the appliance.

Setting the SET+GO

To start of the appliance with necessary settings with only one touch of the sensor field, any time later.

1.Set an oven function (or programme) and temperature (refer to "Setting the oven function" and "Changing the oven temperature").

2.Set DURATION (refer to "Setting the DURATION").

3.Touch again and again until will flash in the display.

4.Touch to set the SET+GO function.

The display shows and with a dot. This dot shows which clock function is activa- ted.

5.Touch any sensor field (apart from ON/OFF) to start the SET+GO function.

You can use SET+GO function only if DURATION is set.

Check result (selected models only)

If you set END or DURATION function, 2 minutes before end of cooking an acoustic signal sounds and lamp activates. The appliance goes to the setting of the END or DURATION

Page 15
Image 15
AEG BE7314401 user manual Setting the END, Setting the SET+GO, Check result selected models only