Instructions for building-in, Storage Shelves

Instructions for building-in

Storage Shelves
The glass shelf above the fruit and
vegetable compartment should
always remain in position, to ensure
fruit and vegetables stay fresh longer.
The remaining storage shelves can be
adjusted to various heights:
Pull the storage shelf forward until it		D338
can be tipped up or down and remo-
ved.
To insert at a different height use the same procedure in reverse.
Adjustment for tall goods:
Remove the front half of the two-part vario glass storage shelf and insert it
at a different level. Space is thus gained for storage of tall goods on the
underlying storage shelf.
Variable Inner Door
The door compartments can be pulled up and removed, and inserted at
other positions as needed.
Variable Storage Box
Some models are equipped with a variable storage box which is fitted under
a door shelf compartment and can be slid sideways.
The box can be inserted under any

Apply joint the sealing strip as shown in figure.

Push appliance into the housing until stop strip (A) touches the kitchen unit.

D765

D023

	door shelf compartment.
1.	To change the position of the stora-
	ge box; lift the shelf compartment
	with the box upwards and out of the
	holders in the door and remove the
	retaining bracket out of the guide
	under the shelf compartment.
2.	Reverse the above operation to insert
	the shelf at a different height.

Open the door and push the appliance against the side of the kitchen unit op- posite to that of appliance hinges.

Fasten the appliance with 4 screws provided in the kit included with the appliance. Snap ventilation grille (C) and hinge cover (D) into position.

	D
D723	C