AEG ESF 103.1 manual Assembling the juice extractor, Dismantling and cleaning, Juice extraction

ESF103_neu_de.book Seite 9 Montag, 15. Dezember 2003 2:46 14

g

Assembling the juice extractor Juice extraction

Before first use, the appliance parts should be cleaned (section on “Dis- mantling and cleaning”).

0Place the appliance on a flat, dry work surface.

Unwanted flex can be inserted into the flex compartment (Fig. 1/12).

0Arrange the motor part in an upright position so that the knob at the front faces you.

0Place the juice bowl with the juice out- let on the LH side of the motor part (Fig. 2).

0Place the strainer basket in the juice bowl (Fig. 3).

0Place the upper part with the juice outlet on the LH side (Fig. 4).

0Engage and press down the locking clips (Fig. 5).

0Push the residue container in properly, so that it engages (Fig. 6).

0Place the container supplied or anoth- er suitable vessel underneath the juice outlet (Fig. 7).

0Position the plunger.

Safety system

The appliance can only be switched on, if all parts of the appliance are pro- perly assembled and joined together.

•The juice bowl must be properly inserted (Fig. 2).

•The locking clips must be properly locked (Fig. 5).

•The residue container must be properly inserted, so that it engages (Fig. 6).

Operate the appliance as follows:

For soft fruit and vegetables = Knob to the right

Fill the appliance with the prepared, chopped fruit or vegetables and lightly press down with the plunger. Smaller pieces can be shaken down on to the surface of the filling bowl. With the plunger, move the fruit or vegetables towards the filling shaft. When filling fruit containing pips (e.g. grapes, to- matoes), hold the plunger when reple- nishing so that it always evenly covers the filling opening. When re-applying the plunger, make sure that the motor is not too strongly retarded. Make sure that the full residue container is promptly emptied. Please check that the strainer basket is free from obs- truction. When the juice has been ex- tracted from the last piece, the motor must run until juice ceases to drip.

Dismantling and cleaning

Important note! The appliance should only be dismantled when the motor has been switched off and the applian- ce unplugged.

0Take out the plunger, remove the resi- due container.

0Unclip both locking clips und lift off the upper part.

0The strainer basket and juice bowl are removed from the motor base together. Wipe the motor part only with a damp cloth! Clean all other parts in hot wa- ter or in normal washing-up water! The sooner this happens after appliance use, the more easily will cleaning pro- ceed! Use a brush to clean the strainer basket and groove in the upper part. Please treat the appliance gently. Never scratch or scour it. Any possible discol- orations (e. g. due to carrots or beet- root) can be rubbed off with vegetable oil.

For firm fruit and vegetables = Knob to the left

To switch off the juice extractor, turn the knob to “0”.

Do not clean in the dishwasher the motor part, upper housing and plunger.

Never immerse the appliance in water!

9