Operation 13
OPERATION
Ignition of the burner
WARNING!
Be very careful when you use open fire in kitchen environment. Manufacturer decline any responsibility in case misuse of the flame
Always light the burner before you put cookware.
To light the burner:
1.Turn the control knob counterclockwise to the maximum position ( 
) and push it down.
2.Keep the control knob pushed for approximately 5 seconds; this will let thermocouple to warm up. If not, the gas supply will be interrupted.
3.Adjust the flame after it is regular.
If after some tries the burner does not light, check if the crown and its cap are in correct positions.
Each control knob has a pilot light. It lights up when you turn the control knob.
1
2
4
1
2
3
4
