![12What to do if...](/images/new-backgrounds/61391/6139123x1.webp)
12What to do if...
–Remove after the appliance is sufficiently cool: limescale rings , water rings, fat stains, shiny metallic discolorations. Use a special cleaning agent for glass ce- ramic or stainless steel.
2.Clean the appliance with a moist cloth and some detergent.
3.At the end rub the appliance dry with a clean cloth.
WHAT TO DO IF...
Problem |
|
| Possible cause and remedy |
|
|
| |
You cannot ac- | • | Activate the appliance again and set the heat setting in 10 seconds. | |
tivate the appli- | • | You touched 2 or more sensor fields at the same time. Only touch one sen- | |
ance or operate |
| sor field. |
|
it. | • | The Child Safety Device or the Lock or Stop+Go operates. See the chapter | |
|
| Operating instruction. | |
| • | There is water or fat stains on the control panel. Clean the control panel. | |
|
| ||
A Sound oper- | You put something on one or more sensor fields. Remove the object from the | ||
ates and the ap- | sensor fields. |
| |
pliance deacti- |
|
|
|
vates. |
|
|
|
A sound oper- |
|
|
|
ates when the |
|
|
|
appliance is de- |
|
|
|
activated. |
|
|
|
The residual | The cooking zone is not hot because it operated only for a short time. If the | ||
heat indicator | cooking zone should be hot, speak to the service centre. | ||
does not comes |
|
|
|
on. |
|
|
|
|
| ||
The Automatic | • There is still residual heat on the cooking zone. Let the cooking zone be- | ||
Heat Up func- |
| come sufficiently cool. | |
tion does not | • | The highest heat setting is set. The highest heat setting has the same pow- | |
operate. |
| er as the Automatic Heat Up function. | |
|
| ||
You cannot ac- | Activate the inner ring first. | ||
tivate the outer |
|
|
|
ring. |
|
|
|
|
| ||
The sensor fields | The cookware is too large or you out it too near to the controls. Put large | ||
become hot. | cookware on the rear cooking zones if it is necessary. | ||
|
| ||
There is no sig- | The signals are deactivated. Activate the signals (see OffSound Control). | ||
nal when you |
|
|
|
touch the panel |
|
|
|
sensor fields. |
|
|
|
| The Automatic Switch Off operates. Deactivate the cooking zone and activate | ||
comes on | |||
| it again after 60 seconds. | ||
| If after 60 seconds | comes on again speak to the service centre. | |
|
|
|
|