4Installation
Safety instructions
WARNING!
You must read these!
Fully obey the laws, ordinances, directives and standards in force in the country where you use the appliance (safety regulations, recycling regulations, electrical safety rules etc.)!
Only a qualified electrician must install the appliance! Keep the minimum distances to other appliances and units!
Install
Protect the cut surfaces of the worktop against moisture with a correct sealant! Seal the appliance to the work top with no space left with a correct sealant!
Protect the bottom of the appliance from steam and moisture, e.g. from a dishwasher or oven!
Do not install the appliance adjacent to doors and below windows! If not, hot cookware can be hit off the hob when you open doors or windows.
WARNING!
Risk of injury from electrical current.
The combination appliance is live.
•Observe electrical safety rules.
•Rated voltage of the combined appliances must match.
•Fit plug and socket connections together properly.
•Install correctly to give
•Loose and incorrect plug and socket connections can make the terminal become too hot.
•A qualified electrician must install the clamping connections correctly.
The appliance must have the electrical installation which lets you disconnect the appli- ance from the mains at all poles with a contact opening width of minimum 3 mm.
You must have correct isolation devices: line protecting
Assembly |
=
R 5mm |
|
| 600mm |
|
|
| |
490 | +1 | mm | 750+1mm |
|
| ||
| = |
|
|