AEG KF 2060 manual KF 2062 Timer c, Preparing small quantities of coffee 2-4cups, Auto shut off

g

KF 2062 Timer (Figure 2c)

0Press the on/off button (Figure 2c/G). The indicator (red) (Figure 2c/F) is illu- minated and the brewing procedure will start.

Preparing small quantities of coffee (2-4 cups)

Your coffee machine has an aroma button (Figure 2c/J). The aroma setting guarantees full coffee enjoyment even with small quantities (2-4 cups).

0Press the aroma button (Figure 2c/J).

The symbol will appear in the dis- play (Figure 2c/A). To cancel the selected quantity 2-4 cups, press the aroma button again. The symbol will go out in the display. Start and end the brewing procedure as described above.

Preparing coffee using the timer Your appliance has a timer with which you can programme the start of the brewing procedure up to 24 hours in advance.

First set the current time. The display (Figure 2c/A) will flash “00:00”.

0Press the button for HOURS (Figure 2c/B) for approx. 2 seconds and hold it down until the correct time is shown in the display (Figure 2c/A).

0Press the button for MINUTES (Figure 2c/C) and proceed as for setting the hours.

Set the time at which you wish the brewing procedure to start.

0Press the programme button (Figure 2c/H).

0Press the button for HOURS (Figure 2c/B) and set the hours.

0Press the button for MINUTES (Figure 2c/C) and set the minutes.

0Press the AUTO-START button (Figure 2c/D).

The display for AUTO-START

(Figure 2c/E) is illuminated. The pro- grammed start time will go out in the display and the current time will reap-

pear. The brewing procedure will start automatically at the starting time you have programmed. The indicator (red) (Figure 2c/F) is illuminated.

To check the programmed start time, press the programme button (Figure 2c/H). The start time will appear in the display (Figure 2c/A). After a few seconds it will go out and the current time will reappear.

If you wish to cancel the selected start time, press the button for AUTO-START (Figure 2c/D). The green display for AUTO-START (Figure 2c/E) will go out.

Important: If there is a brief power failure of up to 5 seconds the data remains stored. In the event of a longer power failure the entered data is erased and the time and start time must be reprogrammed as described above.

Important: Once a start time has been programmed, your coffee machine will automatically start a brewing proce- dure every 24 hours as long as the display (green) for AUTO-START (Figure 2c/E) is illuminated.

You can also use the “2-4 cups” aroma function when a start time is programmed!

0Once the brewing procedure has been completed and you no longer require the warming plate function, switch the appliance off by pressing the on/off button again. The indicator will go out.

Auto shut off

Your coffee machine has a safety cut- out. If the appliance is not used for

2 hours after the brewing procedure has started it switches off automati- cally for safety reasons and also to save energy. The indicator (red) (Figure c/F) will go out.

12