14 www.aeg.com
SETTING AND STARTING A PROGRAMME
1.Turn the programme knob.
2.The indicator of button 4 flashes with red colour.
3.The indicators of the default tempera- ture and spin speed come on. To change the temperature and/or the spin speed, press the related buttons.
4.Set the available functions and the delay start. When you press the rele- vant button, the indicator of the set function comes on or the display shows the related symbol.
5.Press button 4 to start the pro- gramme. The indicator of button 4 is on with red colour.
INTERRUPT A PROGRAMME
1.Press button 4 . The indicator flash- es.
2.Press button 4 again. The washing programme continues.
When the countdown is completed, the programme starts automatically.
Before you press button 4 to start the appliance, you can cancel or change the set of the delay start.
You cannot set the delay start with the Steam programme.
CANCEL THE DELAY START
1.Press button 4 . The related indica- tor flashes.
2.Press button 5 again and again until the display shows 0’.
3.Press button 4 . The programme starts.
OPEN THE LID
While a programme or the delay start op- erates, the lid is locked.
To open the lid:
CANCEL A PROGRAMME
1.Press button 1 to cancel the pro- gramme and to deactivate the appli- ance.
2.Press button 1 again to activate the appliance. Now, you can set a new washing programme.
The appliance does not drain the water.
CHANGE A FUNCTION
You can change only some functions be- fore they operate.
1.Press button 4 . The indicator flash- es.
2.Change the function set.
SET THE DELAY START
1.Press button 5 again and again until the display shows the number of mi- nutes or hours.
2.Press button 4 , the appliance starts the countdown of the delay start.
1.Press button 4 . You can open the lid 2 minutes after the appliance stops. The door lock symbol in the display goes off.
2.Open the lid.
3.Close the lid and press button 4 . The programme or the delay start continues.
If the temperature and level of the water in the drum are too high, the door lock symbol stays on and you cannot open the lid . If neces- sary, do the following procedure to open the lid.
1.Deactivate the appliance.
2.Wait for some minutes.
3.Make sure that there is no wa- ter in the drum.
If you deactivate the appliance, it is necessary to set the programme again.
