The indicator bar is fully filled when you set to the maximum
number of rinses.
L
The Stain symbol comes on when you activate the function.
The Prewash symbol comes on when you activate the func-
tion.
The indicator bar is not fully filled when you set only one of
the functions.
The indicator bar is fully filled when you set the two func-
tions.
START/PAUSE BUTTON
4
Press button
4
to start or interrupt a
programme.
DELAY START BUTTON
5
Press button
5
to delay the start of a
programme from 30 minutes to 20
hours.
TIME SAVE BUTTON
6
Press button 6 to decrease the duration
of the programme.
– Press one time to set 'Shortened du-
ration' for items with daily soil.
– Press two times to set 'Extra Quick'
for items with light soil.
Some programmes accept only
one of the two functions.
EXTRA RINSE BUTTON
7
Press button
7
to add rinsing phases
to a programme.
Use this function for persons allergic to
detergents and in areas where the wa-
ter is soft.
THE STAIN-PREWASHBUTTON
8
Press button
8
to add the stain and/or
a prewash phase to a programme.
Press the button again and again to ac-
tivate one or two options. The related
symbol and the indicator bar comes on
in the display.
STAIN
• Use this function for laundry with
hard stains to remove.
When you set this function, put the
stain remover into compartment .
This function increases the pro-
gramme duration.
This function is not available
with a temperature lower than
40° C.
PREWASH
• Use this function to add a prewash
phase before the washing phase. We
recommend that you use this func-
tion when you have laundry with a
high level of soil.
The set of this function increa-
ses the programme duration.
SPIN BUTTON
9
Press this button to:
• Decrease the m aximum speed of the
spin phase of the programme.
The display shows only the spin
speeds available with the set
programme.
• Deactivate the spin phase.
• Activate th e 'Rinse Hold' function.
Set this function to prevent fabric
creases. The appliance does not
drain the water when the programme
is completed.
TEMPERATURE BUTTON
10
Press button
10
to change the default
temperature. When the display shows
12