4.3Charging

This unit is shipped from the factory with its internal battery fully charged, however, some power may be lost during shipping and the battery should be recharged prior to use. Plug the unit into an appropriate power supply and allow the UPS to charge fully by leaving it plugged in for at least 4 hours with no load (no electrical devices such as computers, monitors, etc.).

4 hours

4.4Computer connection

Connect one computer-related device to each of the power sockets found on the back of the UPS.

4.5Data lines protection

Plug the incoming internet line into the “In” socket at the back of the PROTECT A. UPS.

Incoming phone, fax,

modem line

12