18Installation
1.Open the door.
2.Remove the transport support from the door sides.
3.Remove the transport support from the lower hinge (some models).
Some models are fitted with a silencing pad under the cabinet. Do not remove this pad.
3 |
2 |
Removing the shelf holders
Your appliance is equipped with shelf retainers that make it possible to secure the shelves during transportation.
To remove them proceed as follows:
1.Move the shelf holders in the direction of the arrow (A).
2.Lift up the shelves in the rear edge (B) and push it forward until it is freed (C).
3.Remove the retainers.
| C |
A | B |
|
Rear spacers
Install the spacers provided within the accessory bag as shown in the figure. Install the spacers on the back side of the panel.
Fitting the door handles
(Example for right hinge performance)
The handles are supplied as a kit at delivery.
